中文

                                  Products

                                  Location:Home > Products > Merck
                                  Merck

                                  Milli-Q® Reference Water Purification System

                                  Share:

                                  Back to product list
                                  Detailed introduction

                                  Milli-Q® Reference delivers Type 1 water customized to fit a broad range of research areas and makes ultrapure water conveniently available in any laboratory. It is designed to be fed from a pretreated water source.

                                  Milli-Q® water • Optimized purification

                                  To obtain Milli-Q® ultrapure water quality, the purification sequence has been fully optimized. Water is processed through Q-Gard® and Quantum® purification cartridges to reach a resistivity of 18.2 MΩ.cm (at 25°C) and a TOC value below 5 ppb. It then recirculates through a loop to the dispenser, where an Application Pak removes specific contaminants critical for your experiments. A range of purification cartridges and Application Paks is available for you to select according to your applications.

                                  Made only for Milli-Q® systems, Jetpore® virgin ion-exchange resin is used in all Milli-Q® purification cartridges. Selected for its exceptional performance, it can capture even the most weakly charged ions due to its kinetic capabilities. Both Q-Gard® and Quantum® cartridges also incorporate RFID technology. This provides instant visibility on cartridge parameters and also ensures a safe & optimal performance of your system, giving you full traceability.

                                  Convenience • Simple dispensing & easy maintenance

                                  Using the Milli-Q® Reference dispenser, 

                                  ·         Save time thanks to the volumetric function. It will automatically deliver the water volume that you requested. 

                                  ·         Effortlessly prepare solutions with the detachable, easy-to-handle dispenser. Its design has been conceived to fit the height and shape of all laboratory glassware.

                                   

                                   

                                  Water Specifications

                                  Milli-Q® Reference ultrapure water (Type 1)

                                  Resistivity at 25 °C1

                                  18.2 MΩ•cm

                                  TOC2

                                  ≤ 5 ppb

                                  Particulates (size > 0.22 μm)3

                                  < 1 particulate/mL

                                  Bacteria3,4

                                  < 0.01 CFU/mL

                                  Pyrogens (endotoxins)4

                                  < 0.001 EU/mL

                                  RNases4

                                  < 1 pg/mL

                                  DNases4

                                  < 5 pg/mL

                                  Flow Rate

                                  Up to 2 L/min

                                  1resistivity can also be displayed non-temperature-compensated as required by USP 
                                  2in the appropriate test conditions
                                  3with Millipak® final filter
                                  4with Biopak® polisher
                                  These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water.

                                  A report on conformity of Milli-Q® Reference water quality to Type 1 water quality as described by ASTM®, ISO® 3696 and CLSI® norms, and to Purified Water as described in USP and EP is available upon request.

                                  Feed water

                                  Feed water quality

                                  Elix®, RiOs™, distilled or DI water with conductivity < 100 μS/cm and TOC < 50 ppb

                                  Feed water connection

                                  ½” Gaz M

                                  Feed water pressure *

                                  0 - 0.3 bar

                                  Feed water temperature

                                  5 - 35 °C

                                  * For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower.

                                  System Specifications

                                  Dimensions (H x W x D)

                                  713 x 413 x 458 mm (28.07 x 16.25 x 18.03 in)

                                  Operating weight

                                  19.5 kg (42.99 lb)

                                  Dispenser Delivery Loop length

                                  750 mm (29.52 in)

                                  Electrical power supply cable length

                                  290 mm (11.41 in)

                                  Electrical power supply voltage

                                  100 - 250 V ± 10%

                                  Electrical power supply frequency

                                  50 - 60 Hz ± 10%

                                  Data Connection

                                  Ethernet (RJ45)

                                   

                                  成人AV在线播放_精品国产制服丝袜高跟_日韩无码 国产精品_欧美日韩综合网_国产国产偷精品无码